VAINO INTERNATIONAL LIMITED
Differences Customized Value-added services
Add to Cart
Power saving single station extrusion molding machine for chemical barrel max 120L
Brief introduction
adopted accumulator die head are suitable for producing large and various plastic products up to 120L
multi-point parison controllers with lateral take-out mechanism. Machine frame and die head are movable for replacing molds easily,Flexiable for various container.
Machine specification:
| Max container capacity | L | 120 |
| Number of die | set | 1 |
| Machine Dimension(L×W×H) | M | 6*3*4.5 |
| Total weight | ton | 17 |
| Clamping force | kn | 360 |
| Platen opening stroks | mm | 500-1200 |
| Stroke of mould board | mm | 700 |
| Max mould size(W×H) | mm | 950*1400 |
| Screw diameter | mm | 100 |
| Screw L/D ratio | L/D | 24/1 |
| Plasticising capacity | kg/h | 180 |
| Number of heating zone | zone | 5 |
| Extruder heating power | kw | 30 |
| Power of screw-bar machine | kw | 0.75 |
| Extruder driving power | kw | 75 |
| Hopper capacity | L | 12 |
| Number of heating zone | zone | 5 |
| Power of die heating | kw | 25 |
| Max die-pin diameter | mm | 450 |
| General power of machine | kw | 175 |
| Power of the electric motor of oil pump | kw | 30 |
| Air pressure | Mpa | 1 |
| Average energy consumption | kw | 75 |
| Using quantity of compression air | m3/min | 2 |
| Using quantity of cooling water | L/min | 40 |