VAINO INTERNATIONAL LIMITED
Differences Customized Value-added services
Add to Cart
high speed power saving injection molding machine HM-300 for 4L Plastic pails
Enviromental protection-high energy saving
High performance energy saving result realized the reduction of cost
Not only save energy, but also realized the precise speed and pressure control
High efficiency, lower oil temperature ,make oil talk much smaller, extend the use of hydraulic oil and elements
HIGH ENERGY SAVINGS
Under normal operating conditions,compared with conventional hydraulic injection molding machines,energy saving of 20-80% can be achieved.
MOLDING STABILITY
Compared with conventional injection molding machines,repeatability is greatly improved due to ervo motor closed-loop control
QUICK RESPONSE
Featuring a dynamic servo motor with a response time of only 0.05sec
QUIET OPERATION
Machine runs much lower noise levels, particularly in low speed applications
RELIABLE HOLDING PRESSURE
Compared with traditional hydraulic machine,the holding pressure is more stable and does not have limitation
BETTER OIL TEMPERATRURE STABILITY
The servo system only delivers hydraulic oil as it is needed for the various functions,This prevents unnecessary generation of heat and substantially reduces oil cooling requirements.
Specification
| HM-300 | ||||
| INJECTION UNIT | UNIT | A | B | C |
| SCREW DIAMETER | mm | 55 | 60 | 65 |
| SCREW L/D RETIO | L/D | 22 | 20.2 | 18.6 |
| INJECTION VOLUME | cm3 | 677 | 805 | 945 |
| INJECTION WEIHGT | g | 616 | 733 | 860 |
| oz | 21.72 | 25.85 | 30.34 | |
| INJECTION RATE | cm3/ s | 266.8 | 317.5 | 372.6 |
| INJECTION PRESSURE | Mpa | 200 | 168 | 143 |
| CREW SPEED | rpm | 220 | ||
| CLAMPING UNIT | ||||
| CLAMPING FORCE | kN | 3000 | ||
| MOLD OPEN STROKE | mm | 590 | ||
| SPACE BETWEEN TIE BARS | mm | 620×620 | ||
| MAX.MOLD HEIGHT | mm | 200～630 | ||
| EJECTOR STROKE | mm | 150 | ||
| EJECTOR FORCE | kN | 70 | ||
| OTHERS | ||||
| MAX.PUMP PRESSURE | Mpa | 16 | ||
| PUMP MOTOR POWER | kW | 30 | ||
| HEATER POWER | kW | 18.5 | ||
| MACHINE DIMENSIONS | mm | 6.1×1.7×2.4 | ||
| OIL TANK CAPACITY | L | 530 | ||
| MACHINE WEIGHT | t | 9.3 | ||
Advantage:
1. T Slot Platen;
2.Machine Weight more than most factory.
3.Machine base use rectangular Tube.
4.4pcs safe door are moveable,maintain the machine more easy;
5.Hydraulic tank is moveable,more easy to clean the tank,
6.heating band is made by cermics,use life is long
7.prepare more spare parts for customer
Platen drawing:
