VAINO INTERNATIONAL LIMITED
Differences Customized Value-added services
Add to Cart
High speed injection molding equipment Synchronous servo motor
specifications
It adopts imported plastic injection computer ,with large screen high definition crystal dispaly and human -computer interface in both Chinese and English .Through CPU independent control and treatment , it has reised the running speed of the control system and alarming of ultra-high oil temperature ,thus improving the operating speed of the machine
Servo pump pressure controller is specially optimized for the work characteristics of injection molding machine , which is used for repidly and accurately follow the action curve of system pressure directive ,meanwhile ,the digitalized pressure controller integrated to actuator can optimize the controller properties .
Synchronous servo motor with low inertia,wide power range ,high speed and compact structure can guarantee the high dynamic requirements of system.
It is specially designed for servo system,which adopts seal clearance compensation and can maintain high efficiency even under the conditions of low speed rotation and low viscosity oil .
The screen is well protected to prolong its service life .
Description
| SPECIFICATION | ||||
| MODEL | ||||
| Description | UNIT | K3-330 | ||
| INJECTION UNIT | ||||
| Shot volume | Cm³ | 1095 | 1270 | 1458 |
| Shot weight(ps) | g | 1007 | 1168 | 1341 |
| Shot weight(ps) | Oz | 35.5 | 41.2 | 47.3 |
| Screw diameter | mm | 65 | 70 | 75 |
| Injection pressure | Mpa | 181 | 156 | 136 |
| Injection rate | g/sec | 244 | 283 | 325 |
| ScrewL/D ratio | 23.7 | 22 | 20.5 | |
| Screw stroke | mm | 330 | ||
| Screw speed(stepless) | Rpm | 0～139 | ||
| Nozzle contact force | ton | 11 | ||
| Clamping force | ton | 330 | ||
| Opening stroke | mm | 650 | ||
| Platen size | mmxmm | 980X980 | ||
| Space between tie bars | mmxmm | 680X680 | ||
| Max.daylight | mm | 1330 | ||
| Mold thickness(min.-max.) | mm | 220-680 | ||
| Hydraulic ejection stroke | mm | 190 | ||
| Hydraulic ejection force | ton | 9 | ||
| Ejector pin | Unit | 13 | ||
| POWER UNIT | ||||
| Hydraulic system pressure | Mpa | 16 | ||
| Pump motor | Kw | 30 | ||
| Heating capacity | Kw | 23 | ||
| Number of temp control zones | Unit | 5 | ||
| Oil tank capacity | L | 600 | ||
| Machine dimensions | mxmxm | 6.9X1.7X2.3 | ||
| Machine weight | ton | 12.5 | ||
ADDITIONAL FUCTION
| Voltage | 415v 50hz 3phase 4line |
| Hopper with lid material | SS(stainless) |
| Alarm system | Light shining with sound |
| Heating elements | SSR |
| Heating band quality | Infrared |
| Condenser | One middle bigger |
| Core pull function | 3 hydraulic+3pheumatic |
| Machine program | Keba program with 3hydraulic ,3 pheumatic core pull changable |
| Injection cylinder | 2 |
| Servo system | Drive-Huichuan Motor-Saisi-China Gear pump-Sumitomo-Japan Pressure sensor-KAVLICO |
| Center lubrication system and Manual | Both |
| Lubrication pipe | Plastc pipe with spring protection |
| Lubrication distribute | Auto jam detector distribute |
| Machine bush elements | Copper |
| Loading and un-loading care | For machine lifting purpose, properly positioned and clearly marked ‘hooks’ to be provided. |
|
|
