Applicable for single and double station with single to multiple die heads for producing up to SIX-LAYER CONTAINERS (2 TO 6-LAYER CO-EXTRUSION), such as chemical bottles, catchup bottles, or cosmetic bottles.

2Layer material will be:

Outer layer:PE/PP

inner layer:REPE/REPP

you can decrate your bottle with outer-layer (materbatch),inner layer (virgin or recycle material) to save cost and strength the body.

Advantage:

Mold clamping structure adopting advanced four shafts to clamp the mold ,Can clamp the mold firmly ,stable and reliable ,central mold platen is provided with protruding structure ,binging convenience to installing and dismantling molds, making the design human friendly

Piling out system adopting high performance transducer to drive ,saving power by above 30%,can be equipped with 100points wall ,thickness control ,Adopting foreign famous brand MOOG, improving the uniformity of the finished products ,lowering the weight of the finished products ,Flow and pre-sure proportional control valve. consuming less power ,high output ,of high performance price Ratio.

With self-functioned and stable PLC control system ,as well as the integrative of the machine ,electric devices and hydraulic digital controlled and temperature control of PID have been achieved ,The equipment’s operation speed and stability have been greatly improved ,Friendly operational panel ,easy, convenient

Shaft insertion structure can work with many models of machines with many die head ,of standardized design ,easy to adjust ,accurate of body separate shaft head design ,can be replaced easily ,high quality products

Center distance introduction:

Double head standard Center distance:140,85,110,125mm as option)

Thriple head standard center distance:80mm

Four head standard center distance:80mm

Machine specification:

SPECIFICATION	Unit	MP55
Material		PE,PP,(PVC,PA,PC)OPTION
Max container capacity	L	2
Number of die	set	1-6
Machine Dimension(L×W×H)	M	2.87×2.14×2.28
Total weight	ton	3.5
Clamping force	kn	30
Platen opening stroks	mm	120-350
Stroke of mould board		230
Max mould size(W×H)	mm	360×360
Mould thinkness	mm	125-200
Screw diameter	mm	55/45
Screw L/D ratio	L/D	25/23
Plasticising capacity	kg/h	45/25
Number of heating zone	zone	3
Extruder heating power	kw	13.35
Power of screw-bar machine	kw	0.18
Extruder driving power	kw	11
Number of heating zone	zone	2
Power of die heating	kw	4.2
Max die-pin diameter	mm	75
General power of machine	kw	34.2
Power of the electric motor of oil pump	kw	5.5
Air pressure	Mpa	0.6-0.8
Average energy consumption	kw	23.9
Using quantity of compression air	m³/min	0.8-1
Using quantity of cooling water	m³/min	1.5-2