VAINO INTERNATIONAL LIMITED
Differences Customized Value-added services
Add to Cart
excellent properties high speed injection molding machine HM-330 for AS PS Fans
HIGH SPEED:
Increase 20% performance capacity by using variable displacement pump than fixed pump
This series machine use a high response proportional variable-capacity system, make RMS of the hydraulic system match to the machine running energy, avoid throttling and loss of the overflow energy tremendously ,decrease the machine calorific value, and save the electricity from 30%-60% compared with the common standard machine .the economic efficiency will be more obvious ,which could provide our customers with broad room to choose.
OIL SAVING:
equipped with performance filter device to make sure that the hydraulic oil will keep long life
WATER SAVING:
No overflowing heating,low oil temperature saves cooling water,and increases the using life of the sealing elements
POWER SAVING:
Save power 30-60%
Specification:
| HM-330 | ||||
| INJECTION UNIT | UNIT | A | B | C |
| SCREW DIAMETER | mm | 60 | 65 | 70 |
| SCREW L/D RETIO | L/D | 22.5 | 20.7 | 19.1 |
| INJECTION VOLUME | cm3 | 933 | 1095 | 1270 |
| INJECTION WEIHGT | g | 849 | 996 | 1156 |
| oz | 30 | 35.1 | 40.8 | |
| INJECTION RATE | cm3/ s | 250 | 293.4 | 340.3 |
| INJECTION PRESSURE | Mpa | 213.6 | 182 | 157 |
| CREW SPEED | rpm | 190 | ||
| CLAMPING UNIT | ||||
| CLAMPING FORCE | kN | 3300 | ||
| MOLD OPEN STROKE | mm | 630 | ||
| SPACE BETWEEN TIE BARS | mm | 670×670 | ||
| MAX.MOLD HEIGHT | mm | 250～660 | ||
| EJECTOR STROKE | mm | 160 | ||
| EJECTOR FORCE | kN | 100 | ||
| OTHERS | ||||
| MAX.PUMP PRESSURE | Mpa | 16 | ||
| PUMP MOTOR POWER | kW | 37 | ||
| HEATER POWER | kW | 19.7 | ||
| MACHINE DIMENSIONS | mm | 7×1.85×2.4 | ||
| OIL TANK CAPACITY | L | 580 | ||
| MACHINE WEIGHT | t | 12.8 | ||
Advantage:
1. T Slot Platen;
2. Machine Weight more than most factory.
3. Machine base use rectangular Tube .4pcs safe door are moveable,maintain the machine more easy;
5. Hydraulic tank is moveable,more easy to clean the tank,
6. heating band is made by cermics,use life is long
7. prepare more spare parts for customer
Configuration:
| COMPONENT | BRAND&ORIGINAL | ||
| Fixed pump | Servo | ||
| hydraulic system | |||
| HYDRAULIC MOTOR | INTERMOT-ITALY-CHINA | INTERMOT-ITALY-CHINA | |
| SERVO MOTOR CONTROLLER | / | TONGLING-CHINA | |
| HYD' PUMP | FIXED | VICKERS-USA OR YUKEN-JAPAN | VICKERS-USA OR YUKEN-JAPAN |
| GEAR PUMP | / | SUMITOMO-JAPAN | |
| DIRECTION VALVE | VICKERS-USA OR YUKEN-JAPAN | VICKERS-USA OR YUKEN-JAPAN | |
| PP VALVE | HNC-TAIWAN | / | |
| MOULD ADJUST MOTOR | INTERMOT-ITALY-CHINA | INTERMOT-ITALY-CHINA | |
| electric system | |||
| CONTROLLER | TECHMATION-TAIWAN | TECHMATION-TAIWAN | |
| RELAY | SCHNEIDER-GERMANY | SCHNEIDER-GERMANY | |
| LINEAR TRANSDUCER | MIRAN-CHINA | MIRAN-CHINA | |
| LIMITED SWITCH | SCHNEIDER-GERMANY | SCHNEIDER-GERMANY | |
| BREAKER | SCHNEIDER-GERMANY | LS-KOREA | |
| ELEC'MOTOR | HUANQIU-CHINA | / | |
| others | |||
| HIGH PRESSURE PIPE | GOODYEAR-USA | GOODYEAR-USA | |
| SEAL | Helate-England | Helate-England | |
| AUTO LUBRICATION | SL-CHINA | SL-CHINA | |
| SCREW AND BARREL | 38CrMoAlA-China | 38CrMoAlA-China | |
Platen drawing:
